FAQ

Due to popular demand, and in thanks for their support in VanDerStok, we are currently only selling to members of Defense Distributed LEGIO. Join our mailing list to learn when we will sell to additional channels.

The majority in VanDerStok decided that kits shipped (a) without every necessary component, which (b) require uncommon tools and (c) an hour or more to complete are street legal. G80 sets the new standard in federal compliance.

In states where the sale or transfer of unfinished frames or receivers has been restricted, G80 is also restricted. We do not ship to states that have banned privately made firearms (PMFs).

A G80 Jig Set is the first requirement. G80 Jig Sets are made for repeated use and ship with one of two collections of drill bits for (a) machine or (b) manual finishing the unfinished receiver’s metal obstructions and 3mm and 4mm holes.

Customers have also used a drill press with a 1/4” end mill to peck drill these tabs, or have used a Dremel tool with the following cutters:
– Dremel SKU: 85602
– Dremel SKU: 85422

G80 receivers are compatible with any Glock OEM or aftermarket G19, G23, or G32 Gen3 parts, such as the complete slide, frame parts kit, and any Gen3-5 magazines. G80 receivers are 120R-compatible and can fit any 120R grip module.

Please note that the trigger pin, trigger housing mechanism pin, and slide lock leaf spring in your frame parts kit are substituted for our pins and coiled spring which come with your G80 receiver.

Unfortunately not. G80 receivers only accept the Glock Compact series of slides, meaning the G19, G23, and G32 Gen3. We will release other G80 receiver products in the future, however.

Yes, the files for the grip modules are on our downloads page. If you wish to remix the frame to take a south paw friendly reversible magazine release, feel free to do so.