![G80 Build Kit [Polymer]](https://g80dotcom.s3.us-east-2.amazonaws.com/wp-content/uploads/2026/08/1781084590604-792s91kjugk-7-275x206.png)
![G80 Next Build Kit [Receiver + Grip]](https://g80dotcom.s3.us-east-2.amazonaws.com/wp-content/uploads/2026/08/g80-receiver-grip-kit-275x230.png)
Overview
The Clear G19 17rd Mag lets you see exactly what is in the magazine before you seat it. Round count, round type, and how the stack is sitting are all visible through the translucent body, which is the fastest way to check a magazine short of stripping it.
Built by ETS as the GLK-17, it drops straight into the G80 Grip Module and into any Gen1 through Gen5 double-stack 9mm GLOCK. This is a full-size 17-round body, so in a G19-length grip like the G80 it extends below the grip line and gives you a little extra to hold onto.
ETS builds these from an impact, chemical, and UV resistant polymer over a steel spring and an anti-tilt follower. The feed lips and body are creep resistant, so a magazine left loaded in a range bag for months does not spread. Made in the USA and covered by the ETS lifetime warranty.
Features
See your round count and your round type at a glance, without unloading
Body and lips hold their shape after long-term storage fully loaded
Keeps the stack square through the whole magazine for consistent feeding
Will not crack when dropped, and will not go brittle in heat, cold, or sunlight
Comes apart for cleaning without tools, and takes standard GLOCK base pad extensions
Built in the United States and backed by the ETS lifetime warranty
In the Box
- 1x Clear G19 17rd Mag
What It Fits
Clear G19 17rd Mag FAQ
Yes. The G80 Grip Module is built to GLOCK G19 Gen3 pattern, and this magazine fits every double-stack 9mm GLOCK from Gen1 through Gen5. It seats and drops free in the standard G80 Grip Module and in the Matador Arms module, which uses the same 120R geometry and the same magazine well.
Yes, and that is normal. This is a full-size 17-round body designed around the G17 grip length. In a compact G19-length grip like the G80 Grip Module it extends below the grip line, which gives your pinky somewhere to go and makes the magazine easier to strip if it ever hangs up. If you want a flush fit instead, look at the MagPul G19 15rd Mag.
Two reasons, and both are practical. You can confirm how many rounds are actually in the magazine without pulling it apart or thumbing rounds out, and you can tell at a glance which load is in it, which matters when your range mags and your carry mags look identical in a bag. It also makes teaching and dry practice easier, because a student can see the stack move.
An advanced translucent polymer over a steel internal spring and an anti-tilt polymer follower. ETS specifies the polymer as impact, chemical, and UV resistant, and states that it holds up across temperature extremes without becoming brittle. The feed lips and body are creep resistant, so the magazine keeps its dimensions when stored fully loaded.
Yes. The creep-resistant body is the specific reason ETS calls this out: polymer that creeps lets the feed lips spread over months of storage under spring pressure, and spread lips are how a magazine starts failing to feed. These are designed to be stored loaded.
The base plate is designed for easy disassembly by hand. Depress the retainer through the hole in the floor plate, slide the plate forward off the body, and control the spring as it comes out. Reassembly is the reverse. Wipe the inside dry rather than oiling it, since oil in a magazine body collects grit.
Yes. ETS manufactures these in the United States and backs them with a lifetime warranty.
The floor plate is removable and ETS designs the base plate to work with GLOCK-pattern magazine extensions. Fit varies between extension makers, so check with the manufacturer of the specific base pad you have in mind before buying.
No. This is a 9x19mm magazine only. The G80 platform supports G23 and G32 Gen3 components, but those calibers need their own magazines. Match the magazine to the slide and barrel you are running.
Yes. Magazine capacity limits vary by state and by city, and we do not ship into jurisdictions that prohibit them. The shipping restrictions table further down this page lists every destination we cannot ship to. Check it before ordering, and check your local ordinance as well, since some restrictions are narrower than the state.
