![G80 Build Kit [Polymer]](https://g80dotcom.s3.us-east-2.amazonaws.com/wp-content/uploads/2026/09/1781084590604-792s91kjugk-1-275x206.png)
![G80 Next Build Kit [Receiver + Grip]](https://g80dotcom.s3.us-east-2.amazonaws.com/wp-content/uploads/2026/08/g80-receiver-grip-kit-275x230.png)
Overview
A G80 grip module built to be gripped hard. The standard module borrows the ergonomics of a GLOCK G19 Gen3 and disappears into the holster you already own. This one goes the other way: faceted texture on every surface your hand touches, a high beavertail, a deeply undercut trigger guard, and a magwell flared into the base of the grip.
Underneath the shape, it is the same part. A completed G80 Unfinished Receiver drops in from above and pins in place with two grip pins, because this is a 120R module like every other grip in the G80 and G100 ecosystem. Nothing else about your build changes. Use the one M3 X 26 roll pin for the front pin hole and the included M3 x 22 roll pin for the rear pin hole.
Designed and made by Matador Arms, a veteran owned manufacturer in San Antonio, Texas, and sold here because a platform built on interchangeable grips should have more than one grip worth buying.
Comes With:
1 X M3 x 22 Roll Pin for Rear Pin Hole
1 X Matador Arms Grip Module
Features
Angular molded facets over a matte stipple, carried across both side panels, the front strap and the backstrap. Texture where the hand actually loads the grip, not a band of checkering in the middle of it
The tang runs high and long behind the slide, and the trigger guard is relieved where it meets the grip. Both let the firing hand sit higher, which is the cheapest recoil control there is
The flare is part of the grip rather than a part bolted to the bottom of it. Nothing to fit, nothing to torque, and nothing that can work loose on the range
Takes the completed G80 Unfinished Receiver on the same two grip pins as the standard module, and carries an accessory rail forward of the trigger guard
In the Box
- 1x Grip Module by Matador Arms
Matador Arms Grip Module FAQ
Shape and texture, not fit. The standard module is drawn to GLOCK G19 Gen3 ergonomics with a smooth, holster friendly profile. This one is aggressively textured, runs a higher beavertail, undercuts the trigger guard further, and flares into a magwell at the base of the grip. Both take the same completed G80 receiver and the same two grip pins.
Check before you buy. The standard G80 Grip Module keeps the G19 Gen3 outline precisely so your existing holsters work. This module does not: the beavertail, the trigger guard undercut and the flared magwell all change the profile. A holster cut for a G19 with a magwell is the closer starting point, and a Kydex maker will want to know which grip module you are running.
The same magazines the platform takes: standard GLOCK G19 and Magpul PMAG 19 GL9. Longer G17 magazines will feed and will stand proud of the magwell.
Yes. This is the point of 120R. Drive out the two grip pins, lift the receiver out, drop it into another 120R module and pin it back in. Your completed receiver is not tied to the grip you bought it with, and swapping does not touch the finished part.
No. The grip module has no fire control function. It is a housing, it is not a firearm, and it ships to your door without an FFL. The G80 Unfinished Receiver is the part everything else in the build hangs off, and it is sold separately.
This is the grip module only. A build also needs a G80 Unfinished Receiver, a jig and the tools to finish it, a GLOCK G19 Gen3 compatible lower parts kit, and a slide and barrel. Note that the G80 Receiver supplies its own trigger pin, trigger housing pin and slide lock spring in place of the ones in a standard Gen 3 parts kit.
A veteran owned firearms and accessories manufacturer in San Antonio, Texas, best known for the Mag-X magazine conversion system and their line of roller delayed pistols. This is their grip module for the G80.
GLOCK is a registered trademark of GLOCK, Inc. G80 is not affiliated with, endorsed by, or sponsored by GLOCK, Inc. References to GLOCK are for compatibility only.
