![G80 Build Kit [Polymer]](https://g80dotcom.s3.us-east-2.amazonaws.com/wp-content/uploads/2026/09/1781084590604-792s91kjugk-1-275x206.png)
![G80 Next Build Kit [Receiver + Grip]](https://g80dotcom.s3.us-east-2.amazonaws.com/wp-content/uploads/2026/08/g80-receiver-grip-kit-275x230.png)
Overview
The authentic G80 lower parts kit, also called a frame kit. It holds the Glock Gen 3 compatible parts that complete a G80 frame, from the trigger and trigger bar to the magazine release.
We thoroughly tested every part with the G80 for maximum compatibility and minimal issues. Pins and slide lock spring are not included: they already ship with every G80 Unfinished Receiver and G80 build kit.
Features
Every part has been thoroughly tested with G80 frames, for maximum compatibility and minimal issues
Gen 3 pattern parts, the same generation the G80 Unfinished Receiver is built around
Leaves out the pins and slide lock spring the G80 supplies itself, so nothing in the box duplicates what came with your receiver
This is the G80 lower parts kit, also called a frame kit, sold by the people who make the G80
In the Box
- 1x Connector
- 1x Slide Stop Release with Spring
- 1x Magazine Release (may be extended depending on inventory)
- 1x Magazine Release Spring
- 1x Slide Lock
- 1x Trigger Housing with Ejector
- 1x Trigger Spring
- 1x Trigger with Trigger Bar (may be from P80 depending on inventory)
Not Included
Slide lock spring, trigger housing pin, trigger pin and locking block pin. These ship with every G80 Unfinished Receiver, G80 Build Kit [Polymer], G80 Build Kit [Aluminum] and G80 Next Build Kit [Receiver + Grip].
G80 Lower Parts Kit FAQ
Yes. The G80 build kits and the G80 Unfinished Receiver supply the receiver, the grip module and the G80’s own pins and slide lock spring, but not a lower parts kit. This kit is the part of the build list they leave to you.
The G80 supplies its own, in place of the ones in a standard Glock Gen 3 lower parts kit, and they already come in the box with every G80 Unfinished Receiver and every G80 build kit. Including a second set would only leave you with parts that do not belong in a G80. If you have lost one of the G80’s own, the G80 Hardware Replacement Set replaces them.
Yes. Lower parts kit, LPK and frame kit are three names for the same thing: the small parts that go into the frame, as opposed to the slide. This is the authentic G80 lower parts kit.
Two parts depend on inventory. The magazine release may be an extended one, and the trigger with trigger bar may be from P80. Whichever you receive, it is a part we have tested with G80 frames.
Gen 3. The G80 Unfinished Receiver accepts Glock G19, G23 and G32 Gen 3 components, and this kit is made up of Gen 3 compatible parts. Every part has been tested with G80 frames, which is the fit we stand behind.
A finished G80 Unfinished Receiver in a grip module, which is what the G80 Build Kit gives you along with the jig to finish it, plus a G19, G23 or G32 Gen 3 slide assembly, magazines, and a rotary tool for the finishing work.
GLOCK is a registered trademark of GLOCK, Inc. G80 is not affiliated with, endorsed by, or sponsored by GLOCK, Inc. References to GLOCK are for compatibility only.
